6 Ways to Help Deal With a Sluggish/ Blocked Drain

Sydney was founded in 1788. It is the capital of New South Wales Territory. Because of Sydney’s historical roots, it is common to find old architecture that has been preserved. Unfortunately, one of the downsides of older buildings is outdated plumbing. As a result, you may end up with messy drain issues. A slow drain can be quite frustrating, but a total block is hazardous to your health because dirty water can overflow. The flood can also inflict damage on your floors and walls.

Fortunately, blocked drains in Sydney do not happen overnight. Instead, you will experience a sluggish drain first. And this situation often permeates an unpleasant odour. Before a complete clog occurs, you can try de-clogging your sink or tub yourself. With this approach, calling the plumber will be your last resort. Implementing home solutions will save you money. So go ahead and try these effective methods of unclogging your drain.

Give an Old Wire Hanger a Go

You can use the bent portion of your wire hanger to deal with your clog. It will work just like a tub claw. Take out the drain cover and slowly insert the small hook to poke it through the clog. When it penetrates, you can slowly pull it back. It will take off the gunk like hair, debris, etc., so wear gloves and a mask for protection. Repeat this several times to clear the clog.

Do a Vinegar and Baking Soda Rinse

When you’ve got a stubborn clog, try this solution. Mix equal parts of baking soda and vinegar. Then, it will create a reaction. The chemicals start to fizzle, so pour it in right away. The bubbling fizz will loosen up the gunk that’s stuck in your drain. In addition, it can soften the clog, allowing you to penetrate your claw or hanger easily. Alternatively, you can leave this solution sitting in your drain throughout the night. Then, in the morning, flush it out with hot water.

Pour Boiling Water

For best results, pour boiling water from your kettle. The superheated liquid can melt the grime. In addition, it will soften the scum, dead skin, and other gunk down there. You can repeat this process several times more to restore the flow of your drain.

Whip Out Your Wet-Dry Vacuum Cleaner

If you have this kind of equipment at home, you are in luck. Otherwise, you can borrow from your family. This one-of-a-kind vacuum can work wonders on a clogged drain:

  1. Make sure you place the setting on the wet function.
  2. Cover the vent to avoid a big mess.
  3. Create a tight seal around your drain and hose so the machine can suck out a lot.
  4. Put the machine on the highest setting to ensure it sucks out the blockage.

Try a Store-Bought Drain Cleaner

You will find many different chemicals for blocked drains in Sydney in your local hardware store. Follow the instructions on the package to select the right one. For best results, wear protective goggles, masks, and gloves to avoid inhaling toxic fumes or suffering from chemical burns.

Give Pipe Cleaning a Try

If you are a handyman, you can attempt a DIY pipe for your sink. You can try to take out the pipes from under the sink with the proper tools to give the interior pipes a good cleaning. Remember, you must perform the proper procedure to avoid damage.

However, for tubs and toilet drains with embedded pipes, you have no choice but to call a professional plumber for pipe cleaning. They have sewer-camera inspections and other tools to fix these hidden pipes without creating a mess in your property.

Email This Post